PARTS FINISHING GROUP

1. Hi-Tech Coating - Warren, MI (586) 759-3559 Coats Applied: Chemlok adhesives for rubber to metal bonding, Teflon®, and Molydisulfides Protective – Zinc Rich and Anti-friction/Anti-noise. Pre-Treatment - Zinc-Phosphate, Manganese Phosphate & Shot Blasting Coating Process Methods - (3) Dip/Spin lines, (1) Dip/Drain line, (3) Chain-on-Edge lines and (2) Zinc-Phosphate Coating lines.     2. Parts Finishing Group - Chihuahua, Mexico (011) 52 614 488 1541 Coating Applied: Same as Hi-Tech (Warren, MI) See above Pre-Treatment: Zinc Phosphate, Manganese Phosphate and Parts Washing Coating Process Methods: (1) Dip/Spin line, (2) Chain-on-Edge lines and (1)Phosphate coating line, (1) Paint stripping line and (1) Shot Blast     3. PFG - Queretaro, Mexico (011)52 442 253 0126 Coating Applied: Same as Hi-Tech (Warren, MI) See above Pre-Treatment: Zinc Phosphate, Manganese Phosphate and Parts Washing Coating Process Methods: (1) Dip/Spin line, (2) Chain-on-Edge lines and (1) Phosphate coating line, (1) Paint stripping line and (1) Shot Blast     4. Parts Finishing Group - Kendallville, Indiana (260) 599-0229 Coating Applied: Same as Hi-Tech Coatings (Warren, MI) See above. Pre-Treatment: Zinc Phosphate, Manganese Phosphate and Parts Washing Coating Process Methods: (1) Dip/Spin line, (2) Two Chain-on-Edge lines and (1) One Phosphate Coating line, (1) One Paint Stripping line and (1) Shot Blast     5. JML Painting – Warren, MI (586) 755-4053 Coatings Applied: Chemlok adhesives, Teflon®, Epoxy, Zinc Rich, Iron Phosphate. Coating Process Methods: (1) HVLP Conveyorized Spray lines, (2) Dip/Drain Lines, (1) Dip/Spin line, (3) Hand Paint lines     6. Vassar Coatings – Vassar, MI (989) 823-1100 Coatings Applied: Enameling, Adhesives, Teflon®, Molydisulfides, Carc, Stearates Coating Process Methods: (1) Combination Conveyorized Washer, Iron Phosphate, Chain-on-Edge Spray Coat/Ransburg Disc, Oven and Chiller line. Also (1) Conveyorized HVLP Spray Coat line and (1) Dip/Drain line.     7. Autophoretic Division Chesterfield Township, Mi (586)/949-2735 Coatings Applied: 800 Series Autophoretic®, 900 Series Autophoretic® Coating Process: Each conveyorized line has a pre-cleaning washing system. Parts are racked, washed, dipped, the coating chemically bonds and then cured in oven.

PARTS FINISHING GROUP DEBURRING AND WASHING PLANTS

8. AUTOMATED DEBURRING/A-1 PARTS WASHING, Warren, MI (800) 234-5342 Process: Vibratory/Tumbling, Parts Washing and Chemical De-rusting Process Lines: Conveyorized Parts Washing line, (5) Tunnel Washers, (1) Auger Washer, (12) Vibratory Deburring Units, (10) Tumblers and (1) Ball Burnishing Unit.

PARTS FINISHING GROUP SHOT PEENING/SHOT BLASTING PLANTS

9. BELLEVUE PROCESSING, Detroit, MI (313) 921-1931 Core Process: Shot Peening/Shot Blasting, Paint Stripping/Rust Removal Process Lines: (8) Wheelabrators up to 28 cu. ft., Air Actuated Shot Peening Equipment, (3) Large Blast Rooms, Surface Preparation, Rust Removal, Burn Off Furnaces, (3) Stage Heated Chemical Stripping Lines, (3) Kolene® Lines, Power Wash 3,000 PSI 10. Metal Prep Technology, 5650 W Jefferson, Detroit, MI 48209 (313) 843-2890 Process: Shotpeen/Shotblast, including spinner hanger blasting machines

PARTS FINISHING GROUP HONING, DRILLING, MACHINE & FABRICATING PLANT

11. MICHIGAN HONE & DRILL, Madison Heights, MI (248) 616-9310 Production & Short Run - Honing & Drilling: (30) Honing Machines & (10) Deep Hole Drills, Bore Size Range, Hone .06 to 14.00 I.D., Drilling .06 to 2.00 I.D., Length to 12 feet. Machining: Prototype, Short Run, CNC, EDI, Grinding and Turning Fabricating: Coating Racks and Fixtures Saw Cutting: Tubing and Bar Stock – Up to 25 ft. length